December Projects

Here are a few things in the garage (aka my sewing room) for December.

Three minky blankets ready to quilt and rolled up on swim noodles.  The spray baste washes out even if you leave it a few weeks - and the vacuum clean up is sometimes nicer to do all at once.  I have lots of pixs and explanations to share as each quilt is finished.

I bought some flannel buffalo plaid and black Kona cotton and made holiday coasters for myself and friends.  The tutorial on how to make these is here. 

Went to IKEA and bought a $20 grey fleece blanket - cut it in half - and put some of the plaid flannel on the top.  Very rustic (which might mean sloppy) but oh so comfy. I ran out of plaid - but no worries - got some more to put on the remaining grey fleece.

Will take pixs and show process when I sew this one up.

Lastly - I got some 20" x 20" IKEA pillow inserts for $3 each.  They did squish down to a finished 17.5" square and for a first time effort, I am pretty pleased.  Will share that process too when I get the next two done.  

You might be wondering why I am obsessed with plaid. It started with these reindeer in the display area in the freezer section at my local market.  They were reduced and I couldn't resist.  We opted to keep things simple this year and just scatter a few live trees from Trader Joe's along with my mini herd of 3 reindeer. It has turned into an explosion of plaid and learning two new projects: envelope pillows & 'rustic' fleece throws.  

I hope you are having as much fun as I am messing around with little projects no matter what they be.  

Materials:
Buffalo flannel plaid
IKEA fleece blanket / pillow inserts
Minky from Hawthorne Supply Co. (White, Blush & Stone)
Date: December 2019

Photo Tutorial for Fabric Coasters

On this little blog my most pinned picture is not a quilt but these cute coasters.   I figured it was time to update the coaster posts & include a tutorial -  Enjoy :)

 Whether you use a charm pack or cut the fabric yourself into 5" squares - this coaster design works every time.

These coasters are machine wash and dry friendly (they shrink just a little) ... and no matter what fabric you use: French inspired, modern, novelty, floral ... they look great.

Total items needed are (5) squares 5"x 5" and a piece of fusible fleece 4" x 4" or scrap batting for each coaster.

Put the fusible fleece, fleece or batting on the back square for more padding.  A little spray baste will adhere it if you don't have fusible fleece.  No spray baste? Just sew an "X" through the fleece/batting on the back square.
The reason for this is so your batting or fleece will latch onto the back and not move.

Iron the 5" squares into triangles and assemble as shown above.  Triangles lay on top of each other and the last triangle goes beneath the first one (pic 4). You are kind of weaving the triangles all together.

If you have a design element you want to see on your coaster - do steps 1-4.  I wanted the coffee cups to show on the front of my coaster - so here is how to achieve that.
(1) slide a piece of cardstock or paper plate under your coaster pieces.

(2) put another piece of cardstock on top of that
 Now flip everything over - like you are making pancakes.

(3) Lift off the cardstock and what you see is the BACK of the triangles. That's what you want. The coffee cups I want to highlight are facing down, not towards me.  They will  appear after sewing since I will turn this whole unit inside out! 

(4) Nestle everything tightly and pin so the triangles don't slide around (they will!).

(5) Move the pinned unit on top of the right side of back square (the one with the batting)  and pin everything together (6). 
  

(1) Sew around the edge of the coaster using a 1/4" seam and small stitches.   I usually sew off the coaster after each side but do a few reinforcing back and forth stitches at the corner area. Neatness does not count! Remove pins.
(2) Trim sides and just take a little off the corners.
(3) Dig into the center of the coaster and start to turn it inside out.
(4 - 6) Keep turning it inside out - poking the corners with a chopstick or something pointy.  

Give your coaster a good iron. If your fabric has patterns that don't need highlighting, everything goes faster. You just iron, pin & sew.  But I like the 'flip/pancake' method option so I can choose what part of the design shows.  

Lastly - its personal choice whether to top quilt them - I say 'yes' as they tend to flop & not look finished.  How to do it in one continuous line is shown (a little rustic) below.


May 2018

Quilted Coasters

Whether you use a charm pack or cut the fabric yourself into 5" squares - this coaster design works every time.

These coasters are machine wash and dry friendly (they shrink just a little) ... and no matter what fabric you use: French inspired, modern, novelty, floral ... they look great.

Total items needed are (5) squares 5"x 5" and a piece of fusible fleece 4" x 4" or scrap batting for each coaster.

Put the fusible fleece, fleece or batting on the back square for more padding.  A little spray baste will adhere it if you don't have fusible fleece.  No spray baste? Just sew an "X" through the fleece/batting on the back square.
The reason for this is so your batting/fleece will latch onto the back and not move.

Iron the 5" squares into triangles and assemble as shown above.  Triangles lay on top of each other and the last triangle goes beneath the first one (pic 4). You are kind of weaving the triangles all together.

If you have a design element you want to see on your coaster - do steps 1-4.  I wanted the coffee cups to show on the front of my coaster - so here is how to achieve that.
(1) slide a piece of cardstock or paper plate under your coaster pieces.

(2) put another piece of cardstock on top of that
 Now flip everything over - like you are making pancakes.

(3) Lift off the cardstock and what you see is the BACK of the triangles. That's what you want. The coffee cups I want to highlight are facing down, not towards me.  They will  appear after sewing since I will turn this whole unit inside out! 

(4) Nestle everything tightly and pin so the triangles don't slide around (they will!).

(5) Move the pinned unit on top of the right side of back square (the one with the batting)  and pin everything together (6). 
  

(1) Sew around the edge of the coaster using a 1/4" seam and small stitches.   I usually sew off the coaster after each side but do a few reinforcing back and forth stitches at the corner area. Neatness does not count! Remove pins.
(2) Trim sides and just take a little off the corners.
(3) Dig into the center of the coaster and start to turn it inside out.
(4 - 6) Keep turning it inside out - poking the corners with a chopstick or something pointy.  

Give your coaster a good iron. If your fabric has patterns that don't need highlighting, everything goes faster. You just iron, pin & sew.  But I like the 'flip/pancake' method option so I can choose what part of the design shows.  

Lastly - its personal choice whether to top quilt them - I say 'yes' as they tend to flop & not look finished.  How to do it in one continuous line is shown (a little rustic) below.


Updated May 2018 :)

Oh Deer! Coasters

These coaster were made in 2014.  I made a photo tutorial in May 2018 on how to make fabric coasters which is here. 

August 2014